LTCLHP016-W

LTCLHP016-W

Specification Value
Beam diameter 20 (mm)
Working distance range 35 – 70 (mm)
Light color, peak wavelength white, 6000 K
Spectral FWHM – (nm)
Supply voltage 12-24 (V)
Max power consumption 2.5 (W)
LED forward voltage typical (max) 2.8 (-) (V)
Max LED forward current 350 (mA)
Max pulse current 2000 (mA)
Connector M8
Cables CB244P1500 included
Length 99.9 (mm)
Front diameter 37.7 (mm)
Mass 191 (g)
Operating temperature 0-40 (°C)
Storage temperature 0-50 (°C)
Operating relative humidity 20-85, non condensing (%)
Installation Indoor use only
Risk group according to CEI EN 62471:2010 Risk group 2
Adaugă la oferte
Categorie: Etichetă: Brand:

Descriere

  1. Opto Engineering® recommends green light for high precision measurement applications
  2. Tolerance ± 10%
  3. At max forward current. Tolerance is ± 0.06V on forward voltage measurements
  4. In continuous mode (non-pulsed)
  5. At pulse width <= 10 ms and duty cycle <= 10%. Built-in electronics board must be bypassed (see tech info)
  6. Nominal value, with no spacers in place

Informații suplimentare

Mass

191 (g)
Installation

Indoor use only
Max pulse current

2000 (mA)
Accessory developer

Opto
Max led forward current

350 (mA)
Front diameter

37.7 (mm)
Connector

M8
Supply voltage

12-24 (V)
Operating temperature

0-40 (°C)
Storage temperature

0-50 (°C)
Length

99.9 (mm)
Color

white, 6000 K
Working distance range

35 – 70 (mm)
Max power consumption

2.5 (W)
Operating relative humidity

20-85, non condensing (%)
Risk group (cei 62471)

Risk group 2
Cables

CB244P1500 included
Beam diameter

20 (mm)
Led fwd volt (typ/max)

2.8 (-) (V)
Light color, peak wavelength

white, 6000 K
Operation power source